Bach Box Guide

First step is to put up the garland in the wall, all you need to do is remove the tape behind it and glue to the wall. After that, you can tape the banner from one side to another!

Now blow the balloons (we recommend you buy a balloon pump to make it easier) in pairs of the same colour ( you could mix if you want a different design)

For the foil balloons, use a normal balloon pump and insert in the hole at the end of the balloon (like in the picture)

You should have something like this ready to start!

As you can see, the ballon strip has mini holes in it, you have to pass the ballon tail inside those holes. We recommend to count 25 holes before you put the first ballon.

Once you put both tails it should look like this (notice how we jumped 25 holes before putting the first balloon)

Now you just keep adding more balloons, with a bit of space between them. We recommend adding one pair of each colour.

Keep adding until you have no more balloons left (you should have about 20 holes left)

First stick the hook into the wall. Now insert the strip hole into the hook on both sides and you should have everything up

Now once everything is up, take the glue dots and add about 3 dots behind the mini foil star point and glue anywhere you like

You should end up with something like this! We hope you enjoy your party as much as you can! We would love to see your design, tag us on instagram @bachfairy!